Multimode ultrasonic-assisted decontamination of fruits and vegetables: A review.

Fruits and vegetables (F&V) are a significant part of our diet consumption. Microbial and pesticide residues are the predominant safety hazards of F&V consumption. Ordinary water washing has a very limited effect on removing microorganisms and pesticide residues and requires high water usage. Ultrasound, as an environmentally friendly technology, shows excellent potential for reducing microbial contamination and pesticide residue. This paper summarizes the research on ultrasound application in F&V washing, including the removal of microbial and pesticide residues and the comprehensive effect on their physicochemical characteristics. Furthermore, multimode ultrasonic-assisted techniques like multi-frequency and sequential ultrasound, combined with novel and conventional methods, can enhance the ultrasound-based effect and be more effective and sustainable in preventing F&V from microbial contamination. Overall, this work explicitly establishes the background on the potential for ultrasound cleaning and disinfection in the food industry as a green, effective, and ultimate method of preventing foodborne illnesses.

Early prediction and prevention of infected pancreatic necrosis.

Approximately 20%-30% of patients with acute necrotizing pancreatitis develop infected pancreatic necrosis (IPN), a highly morbid and potentially lethal complication. Early identification of patients at high risk of IPN may facilitate appropriate preventive measures to improve clinical outcomes. In the past two decades, several markers and predictive tools have been proposed and evaluated for this purpose. Conventional biomarkers like C-reactive protein, procalcitonin, lymphocyte count, interleukin-6, and interleukin-8, and newly developed biomarkers like angiopoietin-2 all showed significant association with IPN. On the other hand, scoring systems like the Acute Physiology and Chronic Health Evaluation II and Pancreatitis Activity Scoring System have also been tested, and the results showed that they may provide better accuracy. For early prevention of IPN, several new therapies were tested, including early enteral nutrition, antibiotics, probiotics, immune enhancement, etc., but the results varied. Taken together, several evidence-supported predictive markers and scoring systems are readily available for predicting IPN. However, effective treatments to reduce the incidence of IPN are still lacking apart from early enteral nutrition. In this editorial, we summarize evidence concerning early prediction and prevention of IPN, providing insights into future practice and study design. A more homogeneous patient population with reliable risk-stratification tools may help find effective treatments to reduce the risk of IPN, thereby achieving individualized treatment.

Parameters optimization for decontamination and fine physical regeneration pathways of polypropylene plastics from waste lunchboxes.

Due to the development of the food delivery industry, a large amount of waste lunchboxes made of homo polypropylene (PP) plastic have been generated. This study developed a new technological strategy to effectively regenerate PP from waste lunchboxes. Through response surface curve analysis, it was found that under the optimal process conditions of hot alkali washing at 80 â„ƒ, 30 min, and pH 13, the optimal contact angle was 65.55°, indicating a good oil stain removal effect. By identifying and analyzing the characteristics of impurities in waste lunchboxes, a physical sorting and granulation regeneration process was constructed. And through large-scale statistical analysis and data collection, it was further verified that recycled PP plastics maintained their physical stability and excellent processing performance. The quality stability of recycled PP plastics in terms of impurities content was also verified. By designing different formulations specifically, recycled PP was mixed with different virgin PP and antioxidants in appropriate proportions, and extruded into particles under 150-300 mesh filtration conditions to obtain modified recycled PP. Modified recycled PP was applied in textiles, clothing, and injection molded products. In conclusion, we achieve the up-cylcing of waste PP lunchboxes instead of down-cylcing.

An innovative Fuller's earth-based film-forming formulation for skin decontamination, through removal and entrapment of an organophosphorus compound, paraoxon-ethyl.

Organophosphorus compounds (OPs), such as VX, pose a significant threat due to their neurotoxic and hazardous properties. Skin decontamination is essential to avoid irreversible effects. Fuller's earth (FE), a phyllosilicate conventionally employed in powder form, has demonstrated decontamination capacity against OPs. The aim of this study was to develop a formulation that forms a film on the skin, with a significant OP removal capacity (>95 %) coupled with sequestration capabilities, favorable drying time and mechanical properties to allow for easy application and removal, particularly in emergency context. Various formulations were prepared using different concentrations of polyvinyl alcohol (PVA), FE and surfactants. Their removal and sequestration capacity was tested using paraoxon-ethyl (POX), a chemical that simulates the behavior of VX. Formulations with removal capacity levels surpassing 95 % were mechanically characterized and cell viability assays were performed on Normal Human Dermal Fibroblast (NHDF). The four most promising formulations were used to assess decontamination efficacy on pig ear skin explants. These formulations showed decontamination levels ranging from 84.4 ± 4.7 % to 96.5 ± 1.3 %, which is equivalent to current decontamination methods. These results suggest that this technology could be a novel and effective tool for skin decontamination following exposure to OPs.

Effective skin decontamination with RSDL® (Reactive Skin Decontamination Lotion Kit) following dermal exposure to a Novichok class nerve agent.

In recent years, various poisoning incidents have been reported, involving the alleged use of the so-called Novichok agents, resulting in their addition to the Schedule I list of the Organisation for the Prohibition of Chemical Warfare (OPCW). As the physicochemical properties of these agents are different from the 'classical' nerve agents, such as VX, research is needed to evaluate whether and to what extent existing countermeasures are effective. Here, we evaluated the therapeutic potential of RSDL® (Reactive Skin Decontamination Lotion Kit) for the neutralization of percutaneous toxicity caused by Novichok agents, both in vitro and in vivo. Experiments showed the three selected Novichok agents (A230, A232, A234) could be degraded by RSDL lotion, but at a different rate. The half-life of A234, in the presence of an excess of RSDL lotion, was 36 minutes, as compared to A230 (<5 min) and A232 (18 min). Following dermal exposure of guinea pigs to A234, application of the RSDL kit was highly effective in preventing intoxication, even when applied up until 30 minutes following exposure. Delayed use of the RSDL kit until the appearance of clinical signs of intoxication (3-4 hours) was not able to prevent intoxication progression and deaths. This study determines RSDL decontamination as an effective treatment strategy for dermal exposure to the Novichok agent A234 and underscores the importance of early, forward use of skin decontamination, as rapidly as possible.

Effect of amoxicillin and clindamycin on the gene expression of markers involved in osteoblast physiology.

Background/purpose: Amoxicillin and clindamycin are the most effective decontaminants for intraoral bone grafts before their application in bone regeneration without cytotoxic effects on osteoblasts, but their effects on the gene expression of markers involved in osteoblast growth and differentiation remain unclear. The study objective was to determine the effects of amoxicillin and clindamycin on the gene expression of markers involved in osteoblast growth and differentiation. Materials and methods: Real-time polymerase chain reaction (RT-PCR) was performed to explore the effect of 150 µg/mL clindamycin or 400 µg/mL amoxicillin on the gene expression by primary human osteoblasts (HOBs) of runt-related transcription factor 2 (Runx-2), osterix (OSX), alkaline phosphatase (ALP), osteocalcin (OSC), osteoprotegerin (OPG), receptor activator for nuclear factor κ B ligand (RANKL), type I collagen (Col-I), bone morphogenetic proteins 2 and 7 (BMP-2 and BMP-7), TGF-ß1 and TGF-ß receptors (TGF-ßR1, TGF-ßR2, and TGF-ßR3), and vascular endothelial growth factor (VEGF). Results: Treatment with 150 µg/mL clindamycin significantly increased the gene expression of TFG-ß1, TGF-ßR1, TGF-ßR2, TGF-ßR3, RUNX-2, Col-1, OSX, OSC, BMP-2, BMP-7, ALP, VEGF, and RANKL by HOBs. Treatment with 400 µg/mL amoxicillin significantly increased the gene expression of TGF-ß R1, Col-I, OSC, RANKL, and OPG alone. Conclusion: These findings suggest that 150 µg/mL clindamycin is the decontaminant of choice to treat intraoral bone grafts before their application in bone regeneration. The osteogenic and antibacterial properties of clindamycin can favor and accelerate the integration of bone grafts in the oral cavity.

Combined effect of cold plasma-activated oxygen (CPAO) and microwave on microbial decontamination and quality of milkshake powder.

This study presents a new method combining cold plasma-activated oxygen (CPAO) and microwave (MW) to decontaminate milkshake powder, exploring its effectiveness, mechanisms, and quality impact. CPAO (6 min) alone reduced bacterial load by 0.419 log CFU/g, and MW (3 min) by 0.030 log CFU/g. However, their co-application significantly amplified decontamination, achieving a 1.265 log CFU/g reduction. CPAO-MW co-treatment inflicted more oxidative damage on bacterial cell membranes and intracellular antioxidant defense system, leading to higher mortality. It also raised protein and lipid oxidation, while decreasing vitamin C and A levels in the powder. Specifically, CPAO (6 min)-MW (3 min) co-treatment increased the carbonyl content from 0.438 to 0.891 nmol/mg protein, malondialdehyde from 0.824 to 0.996 mg/kg, and lowered vitamin C from 162.151 to 137.640 mg/kg, and vitamin A from 2.05 to 1.38 mg/kg. This study shows CPAO-MW is effective for decontaminating powdered foods but highlights a need to reduce negative effects.

Does Mixing Activated Charcoal With Cola Improve Tolerability Without Affecting Pharmacokinetics? A Randomized Controlled Crossover Trial.

INTRODUCTION: Activated charcoal is the most common form of gastrointestinal decontamination used for the poisoned patient. One limitation to its use is patient tolerability due to palatability. Some recommend mixing activated charcoal with cola to improve palatability. An important question is whether mixing activated charcoal with cola affects the ability of the activated charcoal to adsorb xenobiotic. METHODS: This was a prospective randomized controlled crossover trial. Five healthy adults aged 18 to 40 years were recruited. Participants received 45 mg/kg acetaminophen rounded down to the nearest whole tablet. One hour later, they were randomized to receive 50 g of an activated charcoal-water premixture alone or mixed with cola. Acetaminophen levels were collected. The area under the curve of acetaminophen concentrations over time was measured as a marker for degree of absorption. Participants also completed an appeal questionnaire in which they rated the activated charcoal preparations. Participants would then return after at least 7 days to repeat the study with the other activated charcoal preparation. RESULTS: Four male participants and 1 female participant were recruited. There was no statistical difference in preference score for activated charcoal alone versus the cola-activated charcoal mixture. There was no statistical difference in the area under the curve of acetaminophen concentrations over time between activated charcoal alone and the cola-activated charcoal mixture. Of note, the study is limited by the small sample size, limiting its statistical power. DISCUSSION: The absorption of acetaminophen in an overdose model is no different when participants received activated charcoal alone or a cola-activated charcoal mixture as suggested by area under the curve. In this small study, there was no difference in preference for activated charcoal alone or a cola-activated charcoal mixture across a range of palatability questions. On an individual level, some participants preferred the activated charcoal-cola mixture, and some preferred the activated charcoal alone.

Removal of heavy metals from dredging marine sediments via electrokinetic hexagonal system: A pilot study in Italy.

Among the several treatment options, electrokinetic (EK) remediation is recognized as an effective technique for the removal of heavy metals from low-permeability porous matrices. However, most of the EK decontamination research reported was performed on linear configuration systems at a laboratory scale. In this study, a series of experiments were performed on a pilot-scale system where the electrodes were arranged in a hexagonal configuration, to assess the improvement of the EK process in the removal of inorganic contaminants from sediments dredged in the harbor of Piombino, Italy. HNO3 was used as acid conditioning and both pH effect and treatment duration time were investigated. Sediment characterization and metal fractionation were also presented, in order to understand how the bioavailability of metals affects the process efficiency. The increase in pH due to the buffering capacity of the sediment in the sections close to the cathode favored the precipitation and accumulation of metals. However, the results highlighted that longer treatment times, combined with an efficient pH reduction, can improve treatment performance, resulting in high removal efficiencies for all the target metals considered (a percentage removal greater than 50% was reached for Cd, Ni, Pb, Cu and Zn). Compared to different EK configuration systems, the hexagonal configuration arrangement applied in our study provides better results for the remediation of dredged marine sediment.

The unveiling of a dynamic duo: hydrodynamic cavitation and cold plasma for the degradation of furosemide in wastewater.

The degradation in water of furosemide (FUR), a widely used diuretic drug, was herein reported. The method entails an integrated approach based on the hybridisation of hydrodynamic cavitation (HC) with electrical discharge (ED) plasma technology. This dynamic duo could increase the production of oxidising compounds in water, in particular hydroxyl radicals (OH radicals), by triggering the rapid homolytic decomposition of water molecules and avoiding the addition of external oxidants. This study clearly emphasises the effectiveness of an integrated approach to improve the degradation of pollutants in wastewater originating from active pharmaceutical ingredients (APIs). The results of HC/ED-assisted FUR degradation in the presence of radical scavengers highlight the predominant role of the radical oxidation mechanism at the gas-liquid interface of the cavitation bubble during HC/ED treatment. A comparative analysis of the three technologies-HC alone, HC/ED and UV alone-emphasised the promising potential of hybrid HC/ED as a scalable industrial technology. This is demonstrated by the higher degradation rates (100%, 10 min) when treating large volumes (5L) of wastewater contaminated with FUR (50 mg/L), even in the presence of other APIs.

Modified cadaver technique to simulate contaminated airway scenarios to train medical providers in suction-assisted laryngoscopy and airway decontamination.

Simulation training plays a vital role in modern medical education, fostering safe skill development. Task-trainer manikin and cadaveric airway management training (CAMT) offer realistic airway management practice. Simulation allows learners the opportunity to manage high-risk, low-frequency scenarios, including difficult airways and massive airway contamination, common in emergent airway management. The suction-assisted laryngoscopy and airway decontamination (SALAD) technique was developed to address massive airway contamination. This paper describes two methods to simulate massive airway contamination utilizing cadavers. We detail our techniques for both esophageal and nasopharyngeal delivery of simulated airway contaminant. Nasopharyngeal delivery was less invasive and required less time to set up. Utilizing cadavers to simulate massive airway contamination in CAMT provides learners with tools to manage airway complications effectively, enhancing readiness for complex airway challenges while promoting patient safety in clinical practice.

Use of Hydrogen Peroxide Vapour for Microbiological Disinfection in Hospital Environments: A Review.

Disinfection of nosocomial pathogens in hospitals is crucial to combat healthcare-acquired infections, which can be acquired by patients, visitors and healthcare workers. However, the presence of a wide range of pathogens and biofilms, combined with the indiscriminate use of antibiotics, presents infection control teams in healthcare facilities with ongoing challenges in the selection of biocides and application methods. This necessitates the development of biocides and innovative disinfection methods that overcome the shortcomings of conventional methods. This comprehensive review finds the use of hydrogen peroxide vapour to be a superior alternative to conventional methods. Motivated by observations in previous studies, herein, we provide a comprehensive overview on the utilisation of hydrogen peroxide vapour as a superior high-level disinfection alternative in hospital settings. This review finds hydrogen peroxide vapour to be very close to an ideal disinfectant due to its proven efficacy against a wide range of microorganisms, safety to use, lack of toxicity concerns and good material compatibility. The superiority of hydrogen peroxide vapour was recently demonstrated in the case of decontamination of N95/FFP2 masks for reuse to address the critical shortage caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) during the COVID-19 pandemic. Despite the significant number of studies demonstrating antimicrobial activity, there remains a need to critically understand the mechanism of action by performing studies that simultaneously measure damage to all bacterial cell components and assess the correlation of this damage with a reduction in viable cell count. This can lead to improvement in antimicrobial efficacy and foster the development of superior approaches.

Does selective digestive decontamination (SDD) increase antibiotic resistance? Long-term comparison of two intensive care units (with and without SDD) of the same tertiary hospital.

PURPOSE: The aim of this study was to to compare the antimicrobial resistance rate and its relationship with the antibiotic consumption in two separate Intensive Care Units (ICUs) of the same hospital, one with and other without selective decontamination of the digestive tract (SDD). METHODS: We performed a retrospective study in the two ICUs of the Araba University Hospital. Trauma and neurosurgical patients are admitted to the SDD-ICU, and general digestive surgery patients go to the no SDD-ICU. From 2014 to 2018 we analyzed the number of isolates, and the bacterial resistance trends of 47 antimicrobial-microorganism combinations. Additionally, antimicrobial consumption was estimated in both ICUs. Resistance rates were also compared with those reported in ENVIN-HELICS Spanish national registry. RESULTS: In the ICU with SDD protocol, there was a significant decrease in the resistance of E. coli to amoxicillin/clavulanic acid and in the resistance of E. faecalis to high concentration of gentamycin and high concentration of streptomycin. A significant increase of resistance of Staphylococcus coagulasa negative (CoNS) to linezolid in the no SDD-ICU was also detected. Overall, the level of resistance in the SDD-ICU was lower or of the same order than in the ICU without SDD and that reported in the Spanish national registry. CONCLUSIONS: SDD had neither a clinically relevant impact on emergence and spread of resistance, nor in the overall systemic antimicrobial use. The patient type rather than the SDD protocol showed to condition the ecology and therefore, the resistance rate in the ICUs.

Environmentally Friendly Bleaching Process of the Cellulose Fibres Materials Using Ozone and Hydrogen Peroxide in the Gas Phase.

The paper presents the new eco-friendly method of bleaching process of the cellulose fibre materials. Cellulose materials were bleached using hydrogen peroxide (both in aqueous solution, vapours, ozone and by the combined action of gaseous hydrogen peroxide and ozone. The method using hydrogen peroxide in aqueous solution presents the standard procedure and was used as the comparison technique. The bleaching processes using gaseous oxidants were carried out in a prototype device for dry, low-temperature treatment of fibrous materials with the use of oxidising agents in the gas phase. The influence of the innovative gas-phase bleaching method on the cotton samples' properties was analysed by Scanning Electron Microscopy (SEM), evaluation of the colour and whiteness, assessment of the polymerisation degree (DP), analysis of the mechanical properties and sorption capacity as well as microbiological assessment against colonies of Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria. The comparison of the obtained results led to the conclusion that the bleaching processes using gas-phase agents-vaporised hydrogen peroxide, ozone or their combination-are non-invasive. The applied bleaching processes resulted in a slightly lower whiteness parameters than standard bath bleaching. After the bleaching processes with ozone and vaporised hydrogen peroxide separately, the decrease in the DP and tensile strength was similar to that observed after the bleaching with aqueous H2O2. When both processes were used together, a higher reduction in DP and tensile strength was noticed. Both oxidising agents showed a strong biocidal effect against bacteria. Gas-phase bleaching procedures, due to the lower temperature (35 °C vs. 98 °C) and minimal water consumption, have economic and environmental advantages, which allows their use in semi-industrial applications. It has been shown that the treatment of cotton fabrics using ozone and hydrogen peroxide in the gas phase allows to simultaneously obtain the bleaching and disinfection effect.

Applications of hollow nanostructures in water treatment considering organic, inorganic, and bacterial pollutants.

One of the major issues of modern society is water contamination with different organic, inorganic, and contaminants bacteria. Finding cost-effective and efficient materials and methods for water treatment and environment remediation is among the scientists' most important considerations. Hollow-structured nanomaterials, including hollow fiber membranes, hollow spheres, hollow nanoboxes, etc., have shown an exciting capability for wastewater refinement approaches, including membrane technology, adsorption, and photocatalytic procedure due to their extremely high specific surface area, high porosity, unique morphology, and low density. Diverse hollow nanostructures could potentially eliminate organic contaminants, including dyes, antibiotics, oil/water emulsions, pesticides, and other phenolic compounds, inorganic pollutants, such as heavy metal ions, salts, phosphate, bromate, and other ions, and bacteria contaminations. Here, a comprehensive overview of hollow nanostructures' fabrication and modification, water contaminant classification, and recent studies in the water treatment field using hollow-structured nanomaterials with a comparative attitude have been provided, indicating the privilege abd detriments of this class of nanomaterials. Eventually, the future outlook of employing hollow nanomaterials in water refinery systems and the upcoming challenges arising in scaling up are also propounded.

A green approach to efficient soil decontamination using supercritical carbon dioxide and ethanol.

As the need for global decommissioning and site remediation of aging and shut-down nuclear power plants continues to grow, it becomes increasingly crucial to efficiently treat contaminated soil while minimizing waste generation. This study explores an innovative soil decontamination approach that utilizes supercritical carbon dioxide (SCCO2) as the primary solvent, along with ethanol as a co-solvent and specific additives, including a chelate ligand (catechol ligand) and a co-ligand (NEt4PFOSA). The advantages of SCCO2, such as its penetration and solubility, coupled with its ability to separate from radioactive waste, are harnessed in this research. The study demonstrates that the combination of SCCO2, ethanol, and additives significantly enhances decontamination efficiency, particularly for cesium (Cs), strontium (Sr), and uranium (U) contamination. Results indicate that decontamination efficiency varies with soil particle size, with smaller particles presenting greater challenges. This study presents a promising eco-friendly soil decontamination technology using SCCO2 containing ethanol and specific additives to efficiently reduce radioactive contamination in soil.

Maltodextrin-Based Cross-Linked Electrospun Mats as Sustainable Sorbents for the Removal of Atenolol from Water.

Maltodextrins are products of starch hydrolysis that can be processed into dry fibres through electrospinning and subsequently cured via mild thermal treatment to obtain nonwoven cross-linked polysaccharide-based mats. The sustainability of the process and the bioderived nature make this class of materials suitable candidates to be studied as renewable sorbents for the removal of contaminants from water. In this work, electrospinning of water solutions containing 50% wt. of commercial maltodextrin (Glucidex 2®) and 16.6% wt. of citric acid was carried out at 1.2 mL/h flow and 30 kV applied voltage, followed by thermal curing at 180 °C of the dry fibres produced to obtain cross-linked mats. Well-defined fibres with a mean diameter of 1.64 ± 0.35 µm were successfully obtained and characterised by scanning electron microscopy, thermogravimetric analysis, and attenuated total reflectance Fourier transform infrared spectroscopy. Afterwards, a series of sorption tests were conducted to evaluate the effectiveness of the mats in removing atenolol from water. The results of the batch tests followed by HPLC-UV/Vis showed high sorption rates, with over 90% of the atenolol removed, and a maximum removal capacity of 7 mg/g. Furthermore, continuous fixed-bed sorption tests proved the positive interaction between the polymers and atenolol.

An Updated Overview of Magnetic Composites for Water Decontamination.

Water contamination by harmful organic and inorganic compounds seriously burdens human health and aquatic life. A series of conventional water purification methods can be employed, yet they come with certain disadvantages, including resulting sludge or solid waste, incomplete treatment process, and high costs. To overcome these limitations, attention has been drawn to nanotechnology for fabricating better-performing adsorbents for contaminant removal. In particular, magnetic nanostructures hold promise for water decontamination applications, benefiting from easy removal from aqueous solutions. In this respect, numerous researchers worldwide have reported incorporating magnetic particles into many composite materials. Therefore, this review aims to present the newest advancements in the field of magnetic composites for water decontamination, describing the appealing properties of a series of base materials and including the results of the most recent studies. In more detail, carbon-, polymer-, hydrogel-, aerogel-, silica-, clay-, biochar-, metal-organic framework-, and covalent organic framework-based magnetic composites are overviewed, which have displayed promising adsorption capacity for industrial pollutants.

Biofouling on titanium implants: a novel formulation of poloxamer and peroxide for in situ removal of pellicle and multi-species oral biofilm.

Eradicating biofouling from implant surfaces is essential in treating peri-implant infections, as it directly addresses the microbial source for infection and inflammation around dental implants. This controlled laboratory study examines the effectiveness of the four commercially available debridement solutions '(EDTA (Prefgel®), NaOCl (Perisolv®), H2O2 (Sigma-Aldrich) and Chlorhexidine (GUM® Paroex®))' in removing the acquired pellicle, preventing pellicle re-formation and removing of a multi-species oral biofilm growing on a titanium implant surface, and compare the results with the effect of a novel formulation of a peroxide-activated 'Poloxamer gel (Nubone® Clean)'. Evaluation of pellicle removal and re-formation was conducted using scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy to assess the surface morphology, elemental composition and chemical surface composition. Hydrophilicity was assessed through contact angle measurements. The multi-species biofilm model included Streptococcus oralis, Fusobacterium nucleatum and Aggregatibacter actinomycetemcomitans, reflecting the natural oral microbiome's complexity. Biofilm biomass was quantified using safranin staining, biofilm viability was evaluated using confocal laser scanning microscopy, and SEM was used for morphological analyses of the biofilm. Results indicated that while no single agent completely eradicated the biofilm, the 'Poloxamer gel' activated with 'H2O2' exhibited promising results. It minimized re-contamination of the pellicle by significantly lowering the contact angle, indicating enhanced hydrophilicity. This combination also showed a notable reduction in carbon contaminants, suggesting the effective removal of organic residues from the titanium surface, in addition to effectively reducing viable bacterial counts. In conclusion, the 'Poloxamer gel + H2O2' combination emerged as a promising chemical decontamination strategy for peri-implant diseases. It underlines the importance of tailoring treatment methods to the unique microbial challenges in peri-implant diseases and the necessity of combining chemical decontaminating strategies with established mechanical cleaning procedures for optimal management of peri-implant diseases.

Design optimization and validation of UV-C illumination chamber for filtering facepiece respirators.

In this study, we constructed an UV-C illumination chamber using commercially available germicidal lamps and other locally available low-cost components for general-purpose biological decontamination purposes. The illumination chamber provides uniform illumination of around 1 J/cm2 in under 5 min across the chamber. The control mechanism was developed to automate the on/off process and make it more secure minimizing health and other electrical safety. To validate the decontamination efficacy of the UV-C Illumination Chamber we performed the Geobacillus spore strip culture assay. Additionally, we performed the viral load measurement by identifying the COVID-19-specific N-gene and ORF1 gene on surgical masks. The gold standard RT-qPCR measurement was performed to detect and quantify the COVID-19-specific gene on the mask sample. The biochemical assay was conducted on the control and test group to identify the presence of different types of bacteria, and fungi before and after exposure under the illumination chamber. The findings of our study revealed satisfactory decontamination efficacy test results. Therefore, it could be an excellent device in healthcare settings as a disinfection tool for biological decontamination such as SAR-CoV-2 virus, personal protection equipment (PPE), (including n95, k95 respirators, and surgical masks), and other common pathogens.